Heap dipping method of dosing

1.                The general number of doses is 8-10 times. 20% of the total dosage; Add 10% of the total amount of gold solvent every 48-72 hours, and release the medicine: 0.1-0.3kg/t additive (for one-time dosing, added at the same time as alkali), gold dissolved.

2.                According to the ore amount and gold grade, the optimal dosage is calculated through the test: the first injection 1. After the completion of the pile, adjust and stabilize the PH value between 10-11.5 with alkali.

3. The tail liquid after adsorption of gold can be reused.

02 Pool immersion dosing method

The soaking time is 7 to 9 days, and the number of doses is 3 to 4 times. 60% of the total dosage; Every 48 hours, add 20% of the total amount of gold solvent, general pool discharge: additive 0.1-0.3kg/t (for one-time dosing, added at the same time as alkali), gold dissolved 2. According to the mineral amount and gold content grade, the best dosage is calculated through the test: the first dose 1. After the ore enters the pool, adjust and stabilize the PH value between 10-11.5 with alkali.

3. The tail liquid after adsorption of gold can be reused.

03 Charcoal slurry (stirring leaching) dosing method

1. After the mineral is made into a pulp, adjust and stabilize the PH value between 9-11.5 with alkali.

2. According to the mineral amount and gold grade, the optimal dosage is calculated through the test: the first injection

The mixing time is determined according to the actual production situation. 70% of the total dosage of the agent, stir to 12 hours and then add 30% of the total amount of gold solubilizer, specific discharge: additive 0.1-0.3kg/t (for one-time dosing, added at the same time as alkali), dissolve gold

3.The tail liquid after adsorption of gold can be reused.

Concentrate

1. The above dosing methods can refer to the traditional production method to determine the best dosing according to the test results

Amount and number of doses.

2. Decide whether additives are needed according to the test results.

3. The detection method of chemical concentration can refer to the cyanogen detection method.

4. The agent reacts with acid to produce harmful gases, and if people and animals accidentally ingest it, seek medical attention in time and have physical contact

Just wash it with water.